No products in the cart.
-
Key Features
- 300Mbps Wireless N Speed – Single-band 2.4GHz signal rate for everyday browsing and email traffic
- 802.3af PoE Powered – Runs data and power over one Ethernet cable, or uses the included 9V/0.6A adapter
- Omada SDN Management – Standalone or cluster mode (up to 24 units) via app, software controller, or hardware controller (OC200/OC300)
- Enterprise Security – WPA/WPA2 Personal and Enterprise with 802.1X RADIUS authentication, plus rogue AP detection
- Ceiling/Wall Mount Design – Compact 30mm-thick housing with mounting kit included for flush installation
TP-Link EAP115 300Mbps Wireless N Ceiling Mount Access Point
KSh4,440KSh4,440 Add to cart -
Key Features & Benefits of the TP-Link EAP225-Outdoor Access Point
- AC1200 dual-band Wi-Fi: Combines 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz, so each device uses the band that suits it.
- MU-MIMO Wave 2: Serves several clients at the same time, which keeps speeds steady in busy areas.
- IP65 weatherproof enclosure: Resists rain and dust, therefore the AP works outdoors across the seasons.
- Gigabit PoE port: Carries data and power on one cable, and runs from any 802.3af switch for a tidy install.
- Omada SDN management: Configure and monitor from the cloud or Omada app, so multi-AP sites stay simple to run.
TP-Link EAP225-Outdoor AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point
KSh9,600KSh9,600 Add to cart -
Key Features & Benefits
- Dual-band AC1200 Wi-Fi 5: Delivers 867 Mbps on 5 GHz plus 300 Mbps on 2.4 GHz. Guests stream, browse, and call without one band slowing the other.
- 802.11ac Wave 2 MU-MIMO: Serves several client devices at once instead of one at a time. This reduces congestion in busy rooms with phones, laptops, and TVs.
- Single-cable PoE power: Draws power and data over one Ethernet run using 802.3af/at PoE. No electrician and no nearby power outlet are needed at the mount point.
- Omada SDN management: Adopts into a controller with one click for cloud or local management. Additionally, it runs standalone for smaller single-unit setups.
- In-wall faceplate design: Mounts into an 86 mm junction box with the screws supplied. The low-profile plate keeps rooms tidy and hides cabling in the wall.
TP-Link EAP230-Wall Omada AC1200 Wireless MU-MIMO Gigabit Wall-Plate Access Point
KSh6,600KSh6,600 Add to cart -
Key Features & Benefits
- AX1800 dual-band Wi-Fi 6: Combines 1201 Mbps on 5 GHz with 574 Mbps on 2.4 GHz. Everyday browsing, video calls, and streaming stay smooth on more devices.
- OFDMA and MU-MIMO: Shares airtime across many clients instead of serving them one by one. As a result, busy rooms feel less congested.
- Gigabit PoE port: Runs on a single Ethernet cable through 802.3af PoE. Additionally, the bundled adapter powers it where PoE is unavailable.
- WPA3 and guest network: Secures traffic with WPA3 and splits users across up to 16 SSIDs. This separates staff and guest access cleanly.
- Omada mesh and roaming: Links access points wirelessly and hands devices over as people move. However you expand, calls and streams stay connected.
TP-Link EAP610 AX1800 Ceiling Mount Wi-Fi 6 Access Point
KSh10,200KSh10,200 Add to cart -
Key Features & Benefits
- AX3000 dual-band Wi-Fi 6: Combines 2402 Mbps on 5 GHz with 574 Mbps on 2.4 GHz. Crowds of laptops and phones stay fast during peak hours.
- OFDMA and MU-MIMO: Serves many devices in the same airtime slot instead of queuing them. As a result, dense rooms see lower latency and steadier speeds.
- Gigabit PoE+ port: Carries data and power over one cable using 802.3at PoE+. Additionally, the bundled adapter powers it where PoE is unavailable.
- WPA3 and secure guest network: Protects traffic with WPA3 and splits users across up to 16 SSIDs. This keeps staff, guest, and payment networks apart.
- Omada mesh and seamless roaming: Links access points wirelessly and hands devices over cleanly. However you scale, calls and streams stay connected as users move.
TP-Link EAP650 AX3000 Ceiling Mount Wi-Fi 6 Access Point
KSh12,000KSh12,000 Add to cart -
Key Features & Benefits
- BE9300 tri-band Wi-Fi 7: Combines 5760 Mbps (6 GHz), 2880 Mbps (5 GHz), and 574 Mbps (2.4 GHz). Crowded rooms stay fast because traffic spreads across three bands.
- 10 Gigabit uplink port: Feeds the radios through one 10G RJ45 connection. As a result, the wired link keeps pace with full Wi-Fi 7 throughput.
- Multi-Link Operation (MLO): Lets compatible devices send data over multiple bands at once. This lowers latency for video calls, gaming, and live streams.
- 320 MHz channels on 6 GHz: Opens wider, cleaner channels on the 6 GHz band. Consequently, more clients transmit at once without interference.
- Omada SDN management: Adopts into a cloud or local controller for centralised control. Additionally, it supports mesh, AI roaming, and standalone operation.
TP-Link EAP773 BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point
KSh31,200KSh31,200 Add to cart -
Key Features & Benefits
- 150 W PoE+ power budget: Runs up to 8 powered devices over Ethernet, cutting cabling and separate power supplies. Each port follows 802.3at/af, delivering up to 30 W to cameras, phones, or access points.
- Two Gigabit SFP fibre slots: Extend links beyond the 100 m copper limit using fibre uplinks. This helps connect distant buildings or a core switch without signal loss.
- Omada SDN cloud management: Configure and monitor the switch remotely through the Omada app or cloud controller. As a result, multi-site admins avoid on-premise visits for routine changes.
- Layer 2+ security controls: ACL, IP-MAC-Port binding, DoS Defend, and 802.1X protect the network edge. These features limit unauthorised access and reduce exposure to common LAN attacks.
- QoS and IGMP snooping: Prioritises voice and video traffic so calls and streams stay smooth under load. Consequently, latency-sensitive applications run cleanly alongside general data.
TP-Link JetStream TL-SG2210MP 10-Port Gigabit Smart Switch with 8 PoE+ Ports & 2 Gigabit SFP Slots
KSh15,600KSh15,600 Add to cart -
Key Features
- 250W total PoE+ budget across 24× IEEE 802.3af/at compliant ports
- 4× Gigabit SFP slots alongside 24× Gigabit RJ45 ports for fiber uplinks
- Omada SDN integration with centralized cloud management and Zero-Touch Provisioning
- 56 Gbps switching capacity with a 41.7 Mpps packet forwarding rate
- Rack-mountable chassis with dual fans for higher port-density deployments
TP-Link JetStream TL-SG2428P 28-Port 10/100/1000Mbps Gigabit Smart Switch with 24-Port PoE+
KSh27,600KSh27,600 Add to cart -
Key Features
- 48x Gigabit PoE+ Ports: Delivers up to 30 W per port with a 500 W total power budget, supporting APs, cameras, and VoIP phones over a single cable.
- 4x 10 Gbps SFP+ Uplinks: Provides non-blocking, low-latency uplinks to servers, core switches, or aggregation layers.
- Omada SDN Integration: Enables centralized cloud or on-premises management of switches, routers, and access points from one dashboard.
- Advanced L2+ and L3 Features: Includes static routing, 802.1Q VLAN, IGMP Snooping, ACLs, and Link Aggregation for scalable network design.
- Robust Security Controls: Combines IP-MAC-Port Binding, 802.1X Authentication, DoS Defend, and Storm Control to guard against common LAN threats.
TP-Link Omada JetStream TL-SG3452XP 48-Port Gigabit L2+ Managed Switch with 48-Port PoE+
KSh84,000KSh84,000 Add to cart -
Key Features
- Centralized Multi-Site Management – Controls up to 500 access points, 100 routers, and 100 switches from one dashboard
- Cloud & On-Premises Access – Manages the network remotely via the Omada app or locally for added security and stability
- Quad-Core A72 Processor – Delivers enough processing power for large-scale business network management
- Real-Time Network Topology & Monitoring – Displays live traffic distribution, alerts, and topology for fast troubleshooting
- USB 3.0 Auto-Backup Port – Protects configuration data with automatic backups to external storage
TP-Link Omada OC300 Hardware Controller
KSh21,600KSh21,600 Add to cart -
Key Features
- AC1200 dual-band Wi-Fi: Combines 300 Mbps on 2.4 GHz with 867 Mbps on 5 GHz for a stable connection across more devices.
- OneMesh compatibility: Works with OneMesh routers to extend one unified network, so devices roam without dropping or reconnecting.
- Intelligent Signal Light: Shows connection strength (blue for good, red for too far) to help find the ideal outlet.
- Built-in Access Point mode: Converts a wired Ethernet connection into a dual-band wireless network via the Ethernet port.
- Tether app management: Allows setup and network control from an Android or iOS device, without needing a computer.
TP-Link RE305 AC1200 Mesh Wi-Fi Range Extender
KSh4,800KSh4,800 Add to cart